Copyright	(c) 2013-2021 Brendan Hay
License	Mozilla Public License, v. 2.0.
Maintainer	Brendan Hay <brendan.g.hay+amazonka@gmail.com>
Stability	auto-generated
Portability	non-portable (GHC extensions)
Safe Haskell	None

Amazonka.MediaConvert.Types.Eac3AtmosSettings

Description

Synopsis

Documentation

data Eac3AtmosSettings Source #

Required when you set (Codec) under (AudioDescriptions)>(CodecSettings) to the value EAC3_ATMOS.

See: newEac3AtmosSettings smart constructor.

Constructors

Eac3AtmosSettings'

Fields

stereoDownmix :: Maybe Eac3AtmosStereoDownmix
Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).
loRoCenterMixLevel :: Maybe Double
Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only center (LoRoCenterMixLevel).
ltRtCenterMixLevel :: Maybe Double
Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left total/Right total center (LtRtCenterMixLevel).
dynamicRangeCompressionLine :: Maybe Eac3AtmosDynamicRangeCompressionLine
Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
ltRtSurroundMixLevel :: Maybe Double
Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, the service ignores Left total/Right total surround (LtRtSurroundMixLevel).
loRoSurroundMixLevel :: Maybe Double
Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only surround (LoRoSurroundMixLevel).
dynamicRangeControl :: Maybe Eac3AtmosDynamicRangeControl
Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.
bitstreamMode :: Maybe Eac3AtmosBitstreamMode
Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).
dynamicRangeCompressionRf :: Maybe Eac3AtmosDynamicRangeCompressionRf
Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.
codingMode :: Maybe Eac3AtmosCodingMode
The coding mode for Dolby Digital Plus JOC (Atmos).
sampleRate :: Maybe Natural
This value is always 48000. It represents the sample rate in Hz.
speechThreshold :: Maybe Natural
Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%
bitrate :: Maybe Natural
Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.
dialogueIntelligence :: Maybe Eac3AtmosDialogueIntelligence
Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.
meteringMode :: Maybe Eac3AtmosMeteringMode
Choose how the service meters the loudness of your audio.
surroundExMode :: Maybe Eac3AtmosSurroundExMode
Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.
downmixControl :: Maybe Eac3AtmosDownmixControl
Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.

Instances

Instances details

Eq Eac3AtmosSettings Source #
Instance details Defined in Amazonka.MediaConvert.Types.Eac3AtmosSettings Methods (==) :: Eac3AtmosSettings -> Eac3AtmosSettings -> Bool # (/=) :: Eac3AtmosSettings -> Eac3AtmosSettings -> Bool #
Read Eac3AtmosSettings Source #
Instance details Defined in Amazonka.MediaConvert.Types.Eac3AtmosSettings Methods readsPrec :: Int -> ReadS Eac3AtmosSettings # readList :: ReadS [Eac3AtmosSettings] # readPrec :: ReadPrec Eac3AtmosSettings # readListPrec :: ReadPrec [Eac3AtmosSettings] #
Show Eac3AtmosSettings Source #
Instance details Defined in Amazonka.MediaConvert.Types.Eac3AtmosSettings Methods showsPrec :: Int -> Eac3AtmosSettings -> ShowS # show :: Eac3AtmosSettings -> String # showList :: [Eac3AtmosSettings] -> ShowS #
Generic Eac3AtmosSettings Source #
Instance details Defined in Amazonka.MediaConvert.Types.Eac3AtmosSettings Associated Types type Rep Eac3AtmosSettings :: Type -> Type # Methods from :: Eac3AtmosSettings -> Rep Eac3AtmosSettings x # to :: Rep Eac3AtmosSettings x -> Eac3AtmosSettings #
NFData Eac3AtmosSettings Source #
Instance details Defined in Amazonka.MediaConvert.Types.Eac3AtmosSettings Methods rnf :: Eac3AtmosSettings -> () #
Hashable Eac3AtmosSettings Source #
Instance details Defined in Amazonka.MediaConvert.Types.Eac3AtmosSettings Methods hashWithSalt :: Int -> Eac3AtmosSettings -> Int # hash :: Eac3AtmosSettings -> Int #
ToJSON Eac3AtmosSettings Source #
Instance details Defined in Amazonka.MediaConvert.Types.Eac3AtmosSettings Methods toJSON :: Eac3AtmosSettings -> Value # toEncoding :: Eac3AtmosSettings -> Encoding # toJSONList :: [Eac3AtmosSettings] -> Value # toEncodingList :: [Eac3AtmosSettings] -> Encoding #
FromJSON Eac3AtmosSettings Source #
Instance details Defined in Amazonka.MediaConvert.Types.Eac3AtmosSettings Methods parseJSON :: Value -> Parser Eac3AtmosSettings # parseJSONList :: Value -> Parser [Eac3AtmosSettings] #
type Rep Eac3AtmosSettings Source #
Instance details Defined in Amazonka.MediaConvert.Types.Eac3AtmosSettings type Rep Eac3AtmosSettings = D1 ('MetaData "Eac3AtmosSettings" "Amazonka.MediaConvert.Types.Eac3AtmosSettings" "libZSservicesZSamazonka-mediaconvertZSamazonka-mediaconvert" 'False) (C1 ('MetaCons "Eac3AtmosSettings'" 'PrefixI 'True) ((((S1 ('MetaSel ('Just "stereoDownmix") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Eac3AtmosStereoDownmix)) :: S1 ('MetaSel ('Just "loRoCenterMixLevel") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Double))) :: (S1 ('MetaSel ('Just "ltRtCenterMixLevel") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Double)) :: S1 ('MetaSel ('Just "dynamicRangeCompressionLine") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Eac3AtmosDynamicRangeCompressionLine)))) :: ((S1 ('MetaSel ('Just "ltRtSurroundMixLevel") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Double)) :: S1 ('MetaSel ('Just "loRoSurroundMixLevel") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Double))) :: (S1 ('MetaSel ('Just "dynamicRangeControl") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Eac3AtmosDynamicRangeControl)) :: S1 ('MetaSel ('Just "bitstreamMode") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Eac3AtmosBitstreamMode))))) :: (((S1 ('MetaSel ('Just "dynamicRangeCompressionRf") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Eac3AtmosDynamicRangeCompressionRf)) :: S1 ('MetaSel ('Just "codingMode") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Eac3AtmosCodingMode))) :: (S1 ('MetaSel ('Just "sampleRate") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :: S1 ('MetaSel ('Just "speechThreshold") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)))) :: ((S1 ('MetaSel ('Just "bitrate") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :: S1 ('MetaSel ('Just "dialogueIntelligence") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Eac3AtmosDialogueIntelligence))) :: (S1 ('MetaSel ('Just "meteringMode") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Eac3AtmosMeteringMode)) :: (S1 ('MetaSel ('Just "surroundExMode") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Eac3AtmosSurroundExMode)) :: S1 ('MetaSel ('Just "downmixControl") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Eac3AtmosDownmixControl))))))))

newEac3AtmosSettings :: Eac3AtmosSettings Source #

Create a value of Eac3AtmosSettings with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:stereoDownmix:Eac3AtmosSettings', eac3AtmosSettings_stereoDownmix - Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).

$sel:loRoCenterMixLevel:Eac3AtmosSettings', eac3AtmosSettings_loRoCenterMixLevel - Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only center (LoRoCenterMixLevel).

$sel:ltRtCenterMixLevel:Eac3AtmosSettings', eac3AtmosSettings_ltRtCenterMixLevel - Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left total/Right total center (LtRtCenterMixLevel).

$sel:dynamicRangeCompressionLine:Eac3AtmosSettings', eac3AtmosSettings_dynamicRangeCompressionLine - Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

$sel:ltRtSurroundMixLevel:Eac3AtmosSettings', eac3AtmosSettings_ltRtSurroundMixLevel - Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, the service ignores Left total/Right total surround (LtRtSurroundMixLevel).

$sel:loRoSurroundMixLevel:Eac3AtmosSettings', eac3AtmosSettings_loRoSurroundMixLevel - Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only surround (LoRoSurroundMixLevel).

$sel:dynamicRangeControl:Eac3AtmosSettings', eac3AtmosSettings_dynamicRangeControl - Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.

$sel:bitstreamMode:Eac3AtmosSettings', eac3AtmosSettings_bitstreamMode - Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

$sel:dynamicRangeCompressionRf:Eac3AtmosSettings', eac3AtmosSettings_dynamicRangeCompressionRf - Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

$sel:codingMode:Eac3AtmosSettings', eac3AtmosSettings_codingMode - The coding mode for Dolby Digital Plus JOC (Atmos).

$sel:sampleRate:Eac3AtmosSettings', eac3AtmosSettings_sampleRate - This value is always 48000. It represents the sample rate in Hz.

$sel:speechThreshold:Eac3AtmosSettings', eac3AtmosSettings_speechThreshold - Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%

$sel:bitrate:Eac3AtmosSettings', eac3AtmosSettings_bitrate - Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.

$sel:dialogueIntelligence:Eac3AtmosSettings', eac3AtmosSettings_dialogueIntelligence - Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.

$sel:meteringMode:Eac3AtmosSettings', eac3AtmosSettings_meteringMode - Choose how the service meters the loudness of your audio.

$sel:surroundExMode:Eac3AtmosSettings', eac3AtmosSettings_surroundExMode - Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.

$sel:downmixControl:Eac3AtmosSettings', eac3AtmosSettings_downmixControl - Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.

eac3AtmosSettings_stereoDownmix :: Lens' Eac3AtmosSettings (Maybe Eac3AtmosStereoDownmix) Source #

Choose how the service does stereo downmixing. Default value: Not indicated (ATMOS_STORAGE_DDP_DMIXMOD_NOT_INDICATED) Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Stereo downmix (StereoDownmix).

eac3AtmosSettings_loRoCenterMixLevel :: Lens' Eac3AtmosSettings (Maybe Double) Source #

Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only center (LoRoCenterMixLevel).

eac3AtmosSettings_ltRtCenterMixLevel :: Lens' Eac3AtmosSettings (Maybe Double) Source #

Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left total/Right total center (LtRtCenterMixLevel).

eac3AtmosSettings_dynamicRangeCompressionLine :: Lens' Eac3AtmosSettings (Maybe Eac3AtmosDynamicRangeCompressionLine) Source #

Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression line (DynamicRangeCompressionLine). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

eac3AtmosSettings_ltRtSurroundMixLevel :: Lens' Eac3AtmosSettings (Maybe Double) Source #

Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB) Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, the service ignores Left total/Right total surround (LtRtSurroundMixLevel).

eac3AtmosSettings_loRoSurroundMixLevel :: Lens' Eac3AtmosSettings (Maybe Double) Source #

Specify a value for the following Dolby Atmos setting: Left only/Right only (Lo/Ro surround). MediaConvert uses this value for downmixing. Default value: -3 dB (ATMOS_STORAGE_DDP_MIXLEV_MINUS_3_DB). Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix (Eac3AtmosStereoDownmix). Related setting: To have MediaConvert use this value, keep the default value, Custom (SPECIFIED) for the setting Downmix control (DownmixControl). Otherwise, MediaConvert ignores Left only/Right only surround (LoRoSurroundMixLevel).

eac3AtmosSettings_dynamicRangeControl :: Lens' Eac3AtmosSettings (Maybe Eac3AtmosDynamicRangeControl) Source #

Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom (SPECIFIED), to provide dynamic range control values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line (DynamicRangeCompressionLine) and Dynamic range compression RF (DynamicRangeCompressionRf). When you keep the value Custom (SPECIFIED) for Dynamic range control (DynamicRangeControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.

eac3AtmosSettings_bitstreamMode :: Lens' Eac3AtmosSettings (Maybe Eac3AtmosBitstreamMode) Source #

Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

eac3AtmosSettings_dynamicRangeCompressionRf :: Lens' Eac3AtmosSettings (Maybe Eac3AtmosDynamicRangeCompressionRf) Source #

Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light (ATMOS_STORAGE_DDP_COMPR_FILM_LIGHT) Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom (SPECIFIED) for the setting Dynamic range control (DynamicRangeControl). Otherwise, MediaConvert ignores Dynamic range compression RF (DynamicRangeCompressionRf). For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

eac3AtmosSettings_codingMode :: Lens' Eac3AtmosSettings (Maybe Eac3AtmosCodingMode) Source #

The coding mode for Dolby Digital Plus JOC (Atmos).

eac3AtmosSettings_sampleRate :: Lens' Eac3AtmosSettings (Maybe Natural) Source #

This value is always 48000. It represents the sample rate in Hz.

eac3AtmosSettings_speechThreshold :: Lens' Eac3AtmosSettings (Maybe Natural) Source #

Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%

eac3AtmosSettings_bitrate :: Lens' Eac3AtmosSettings (Maybe Natural) Source #

Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.

eac3AtmosSettings_dialogueIntelligence :: Lens' Eac3AtmosSettings (Maybe Eac3AtmosDialogueIntelligence) Source #

Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.

eac3AtmosSettings_meteringMode :: Lens' Eac3AtmosSettings (Maybe Eac3AtmosMeteringMode) Source #

Choose how the service meters the loudness of your audio.

eac3AtmosSettings_surroundExMode :: Lens' Eac3AtmosSettings (Maybe Eac3AtmosSurroundExMode) Source #

Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.

eac3AtmosSettings_downmixControl :: Lens' Eac3AtmosSettings (Maybe Eac3AtmosDownmixControl) Source #

Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom (SPECIFIED) to provide downmix values in your job settings. Choose Follow source (INITIALIZE_FROM_SOURCE) to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround (LoRoSurroundMixLevel), Left total/Right total surround (LtRtSurroundMixLevel), Left total/Right total center (LtRtCenterMixLevel), Left only/Right only center (LoRoCenterMixLevel), and Stereo downmix (StereoDownmix). When you keep Custom (SPECIFIED) for Downmix control (DownmixControl) and you don't specify values for the related settings, MediaConvert uses default values for those settings.