Copyright	(c) 2013-2021 Brendan Hay
License	Mozilla Public License, v. 2.0.
Maintainer	Brendan Hay <brendan.g.hay+amazonka@gmail.com>
Stability	auto-generated
Portability	non-portable (GHC extensions)
Safe Haskell	None

Amazonka.Lightsail.Types.PortInfo

Description

Synopsis

data PortInfo = PortInfo' {
- fromPort :: Maybe Int
- cidrs :: Maybe [Text]
- protocol :: Maybe NetworkProtocol
- cidrListAliases :: Maybe [Text]
- ipv6Cidrs :: Maybe [Text]
- toPort :: Maybe Int
}
newPortInfo :: PortInfo
portInfo_fromPort :: Lens' PortInfo (Maybe Int)
portInfo_cidrs :: Lens' PortInfo (Maybe [Text])
portInfo_protocol :: Lens' PortInfo (Maybe NetworkProtocol)
portInfo_cidrListAliases :: Lens' PortInfo (Maybe [Text])
portInfo_ipv6Cidrs :: Lens' PortInfo (Maybe [Text])
portInfo_toPort :: Lens' PortInfo (Maybe Int)

Documentation

data PortInfo Source #

Describes ports to open on an instance, the IP addresses allowed to connect to the instance through the ports, and the protocol.

See: newPortInfo smart constructor.

Constructors

PortInfo'

Fields

fromPort :: Maybe Int
The first port in a range of open ports on an instance.
Allowed ports:
- TCP and UDP - 0 to 65535
- ICMP - The ICMP type for IPv4 addresses. For example, specify 8 as the fromPort (ICMP type), and -1 as the toPort (ICMP code), to enable ICMP Ping. For more information, see Control Messages on Wikipedia.
- ICMPv6 - The ICMP type for IPv6 addresses. For example, specify 128 as the fromPort (ICMPv6 type), and 0 as toPort (ICMPv6 code). For more information, see Internet Control Message Protocol for IPv6.
cidrs :: Maybe [Text]
The IPv4 address, or range of IPv4 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol.
The ipv6Cidrs parameter lists the IPv6 addresses that are allowed to connect to an instance.
Examples:
- To allow the IP address 192.0.2.44, specify 192.0.2.44 or 192.0.2.44/32.
- To allow the IP addresses 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.
For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.
protocol :: Maybe NetworkProtocol
The IP protocol name.
The name can be one of the following:
- tcp - Transmission Control Protocol (TCP) provides reliable, ordered, and error-checked delivery of streamed data between applications running on hosts communicating by an IP network. If you have an application that doesn't require reliable data stream service, use UDP instead.
- all - All transport layer protocol types. For more general information, see Transport layer on Wikipedia.
- udp - With User Datagram Protocol (UDP), computer applications can send messages (or datagrams) to other hosts on an Internet Protocol (IP) network. Prior communications are not required to set up transmission channels or data paths. Applications that don't require reliable data stream service can use UDP, which provides a connectionless datagram service that emphasizes reduced latency over reliability. If you do require reliable data stream service, use TCP instead.
- icmp - Internet Control Message Protocol (ICMP) is used to send error messages and operational information indicating success or failure when communicating with an instance. For example, an error is indicated when an instance could not be reached. When you specify icmp as the protocol, you must specify the ICMP type using the fromPort parameter, and ICMP code using the toPort parameter.
cidrListAliases :: Maybe [Text]
An alias that defines access for a preconfigured range of IP addresses.
The only alias currently supported is lightsail-connect, which allows IP addresses of the browser-based RDP/SSH client in the Lightsail console to connect to your instance.
ipv6Cidrs :: Maybe [Text]
The IPv6 address, or range of IPv6 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol. Only devices with an IPv6 address can connect to an instance through IPv6; otherwise, IPv4 should be used.
The cidrs parameter lists the IPv4 addresses that are allowed to connect to an instance.
For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.
toPort :: Maybe Int
The last port in a range of open ports on an instance.
Allowed ports:
- TCP and UDP - 0 to 65535
- ICMP - The ICMP code for IPv4 addresses. For example, specify 8 as the fromPort (ICMP type), and -1 as the toPort (ICMP code), to enable ICMP Ping. For more information, see Control Messages on Wikipedia.
- ICMPv6 - The ICMP code for IPv6 addresses. For example, specify 128 as the fromPort (ICMPv6 type), and 0 as toPort (ICMPv6 code). For more information, see Internet Control Message Protocol for IPv6.

Instances

Instances details

Eq PortInfo Source #
Instance details Defined in Amazonka.Lightsail.Types.PortInfo Methods (==) :: PortInfo -> PortInfo -> Bool # (/=) :: PortInfo -> PortInfo -> Bool #
Read PortInfo Source #
Instance details Defined in Amazonka.Lightsail.Types.PortInfo Methods readsPrec :: Int -> ReadS PortInfo # readList :: ReadS [PortInfo] # readPrec :: ReadPrec PortInfo # readListPrec :: ReadPrec [PortInfo] #
Show PortInfo Source #
Instance details Defined in Amazonka.Lightsail.Types.PortInfo Methods showsPrec :: Int -> PortInfo -> ShowS # show :: PortInfo -> String # showList :: [PortInfo] -> ShowS #
Generic PortInfo Source #
Instance details Defined in Amazonka.Lightsail.Types.PortInfo Associated Types type Rep PortInfo :: Type -> Type # Methods from :: PortInfo -> Rep PortInfo x # to :: Rep PortInfo x -> PortInfo #
NFData PortInfo Source #
Instance details Defined in Amazonka.Lightsail.Types.PortInfo Methods rnf :: PortInfo -> () #
Hashable PortInfo Source #
Instance details Defined in Amazonka.Lightsail.Types.PortInfo Methods hashWithSalt :: Int -> PortInfo -> Int # hash :: PortInfo -> Int #
ToJSON PortInfo Source #
Instance details Defined in Amazonka.Lightsail.Types.PortInfo Methods toJSON :: PortInfo -> Value # toEncoding :: PortInfo -> Encoding # toJSONList :: [PortInfo] -> Value # toEncodingList :: [PortInfo] -> Encoding #
type Rep PortInfo Source #
Instance details Defined in Amazonka.Lightsail.Types.PortInfo type Rep PortInfo = D1 ('MetaData "PortInfo" "Amazonka.Lightsail.Types.PortInfo" "libZSservicesZSamazonka-lightsailZSamazonka-lightsail" 'False) (C1 ('MetaCons "PortInfo'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "fromPort") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :: (S1 ('MetaSel ('Just "cidrs") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :: S1 ('MetaSel ('Just "protocol") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe NetworkProtocol)))) :: (S1 ('MetaSel ('Just "cidrListAliases") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :: (S1 ('MetaSel ('Just "ipv6Cidrs") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :*: S1 ('MetaSel ('Just "toPort") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int))))))

newPortInfo :: PortInfo Source #

Create a value of PortInfo with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:fromPort:PortInfo', portInfo_fromPort - The first port in a range of open ports on an instance.

Allowed ports:

TCP and UDP - 0 to 65535
ICMP - The ICMP type for IPv4 addresses. For example, specify 8 as the fromPort (ICMP type), and -1 as the toPort (ICMP code), to enable ICMP Ping. For more information, see Control Messages on Wikipedia.
ICMPv6 - The ICMP type for IPv6 addresses. For example, specify 128 as the fromPort (ICMPv6 type), and 0 as toPort (ICMPv6 code). For more information, see Internet Control Message Protocol for IPv6.

$sel:cidrs:PortInfo', portInfo_cidrs - The IPv4 address, or range of IPv4 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol.

The ipv6Cidrs parameter lists the IPv6 addresses that are allowed to connect to an instance.

Examples:

To allow the IP address 192.0.2.44, specify 192.0.2.44 or 192.0.2.44/32.
To allow the IP addresses 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.

For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

$sel:protocol:PortInfo', portInfo_protocol - The IP protocol name.

The name can be one of the following:

tcp - Transmission Control Protocol (TCP) provides reliable, ordered, and error-checked delivery of streamed data between applications running on hosts communicating by an IP network. If you have an application that doesn't require reliable data stream service, use UDP instead.
all - All transport layer protocol types. For more general information, see Transport layer on Wikipedia.
udp - With User Datagram Protocol (UDP), computer applications can send messages (or datagrams) to other hosts on an Internet Protocol (IP) network. Prior communications are not required to set up transmission channels or data paths. Applications that don't require reliable data stream service can use UDP, which provides a connectionless datagram service that emphasizes reduced latency over reliability. If you do require reliable data stream service, use TCP instead.
icmp - Internet Control Message Protocol (ICMP) is used to send error messages and operational information indicating success or failure when communicating with an instance. For example, an error is indicated when an instance could not be reached. When you specify icmp as the protocol, you must specify the ICMP type using the fromPort parameter, and ICMP code using the toPort parameter.

$sel:cidrListAliases:PortInfo', portInfo_cidrListAliases - An alias that defines access for a preconfigured range of IP addresses.

The only alias currently supported is lightsail-connect, which allows IP addresses of the browser-based RDP/SSH client in the Lightsail console to connect to your instance.

$sel:ipv6Cidrs:PortInfo', portInfo_ipv6Cidrs - The IPv6 address, or range of IPv6 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol. Only devices with an IPv6 address can connect to an instance through IPv6; otherwise, IPv4 should be used.

The cidrs parameter lists the IPv4 addresses that are allowed to connect to an instance.

For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

$sel:toPort:PortInfo', portInfo_toPort - The last port in a range of open ports on an instance.

Allowed ports:

TCP and UDP - 0 to 65535
ICMP - The ICMP code for IPv4 addresses. For example, specify 8 as the fromPort (ICMP type), and -1 as the toPort (ICMP code), to enable ICMP Ping. For more information, see Control Messages on Wikipedia.
ICMPv6 - The ICMP code for IPv6 addresses. For example, specify 128 as the fromPort (ICMPv6 type), and 0 as toPort (ICMPv6 code). For more information, see Internet Control Message Protocol for IPv6.

portInfo_fromPort :: Lens' PortInfo (Maybe Int) Source #

The first port in a range of open ports on an instance.

Allowed ports:

TCP and UDP - 0 to 65535
ICMP - The ICMP type for IPv4 addresses. For example, specify 8 as the fromPort (ICMP type), and -1 as the toPort (ICMP code), to enable ICMP Ping. For more information, see Control Messages on Wikipedia.
ICMPv6 - The ICMP type for IPv6 addresses. For example, specify 128 as the fromPort (ICMPv6 type), and 0 as toPort (ICMPv6 code). For more information, see Internet Control Message Protocol for IPv6.

portInfo_cidrs :: Lens' PortInfo (Maybe [Text]) Source #

The IPv4 address, or range of IPv4 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol.

The ipv6Cidrs parameter lists the IPv6 addresses that are allowed to connect to an instance.

Examples:

To allow the IP address 192.0.2.44, specify 192.0.2.44 or 192.0.2.44/32.
To allow the IP addresses 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.

For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

portInfo_protocol :: Lens' PortInfo (Maybe NetworkProtocol) Source #

The IP protocol name.

The name can be one of the following:

tcp - Transmission Control Protocol (TCP) provides reliable, ordered, and error-checked delivery of streamed data between applications running on hosts communicating by an IP network. If you have an application that doesn't require reliable data stream service, use UDP instead.
all - All transport layer protocol types. For more general information, see Transport layer on Wikipedia.
udp - With User Datagram Protocol (UDP), computer applications can send messages (or datagrams) to other hosts on an Internet Protocol (IP) network. Prior communications are not required to set up transmission channels or data paths. Applications that don't require reliable data stream service can use UDP, which provides a connectionless datagram service that emphasizes reduced latency over reliability. If you do require reliable data stream service, use TCP instead.
icmp - Internet Control Message Protocol (ICMP) is used to send error messages and operational information indicating success or failure when communicating with an instance. For example, an error is indicated when an instance could not be reached. When you specify icmp as the protocol, you must specify the ICMP type using the fromPort parameter, and ICMP code using the toPort parameter.

portInfo_cidrListAliases :: Lens' PortInfo (Maybe [Text]) Source #

An alias that defines access for a preconfigured range of IP addresses.

The only alias currently supported is lightsail-connect, which allows IP addresses of the browser-based RDP/SSH client in the Lightsail console to connect to your instance.

portInfo_ipv6Cidrs :: Lens' PortInfo (Maybe [Text]) Source #

The IPv6 address, or range of IPv6 addresses (in CIDR notation) that are allowed to connect to an instance through the ports, and the protocol. Only devices with an IPv6 address can connect to an instance through IPv6; otherwise, IPv4 should be used.

The cidrs parameter lists the IPv4 addresses that are allowed to connect to an instance.

For more information about CIDR block notation, see Classless Inter-Domain Routing on Wikipedia.

portInfo_toPort :: Lens' PortInfo (Maybe Int) Source #

The last port in a range of open ports on an instance.

Allowed ports:

TCP and UDP - 0 to 65535
ICMP - The ICMP code for IPv4 addresses. For example, specify 8 as the fromPort (ICMP type), and -1 as the toPort (ICMP code), to enable ICMP Ping. For more information, see Control Messages on Wikipedia.
ICMPv6 - The ICMP code for IPv6 addresses. For example, specify 128 as the fromPort (ICMPv6 type), and 0 as toPort (ICMPv6 code). For more information, see Internet Control Message Protocol for IPv6.