See: newUpdateEventSourceMapping smart constructor.

Create a value of UpdateEventSourceMapping with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:enabled:UpdateEventSourceMapping', updateEventSourceMapping_enabled - When true, the event source mapping is active. When false, Lambda pauses polling and invocation.

Default: True

$sel:bisectBatchOnFunctionError:UpdateEventSourceMapping', updateEventSourceMapping_bisectBatchOnFunctionError - (Streams only) If the function returns an error, split the batch in two and retry.

$sel:parallelizationFactor:UpdateEventSourceMapping', updateEventSourceMapping_parallelizationFactor - (Streams only) The number of batches to process from each shard concurrently.

$sel:maximumRetryAttempts:UpdateEventSourceMapping', updateEventSourceMapping_maximumRetryAttempts - (Streams only) Discard records after the specified number of retries. The default value is infinite (-1). When set to infinite (-1), failed records will be retried until the record expires.

$sel:batchSize:UpdateEventSourceMapping', updateEventSourceMapping_batchSize - The maximum number of records in each batch that Lambda pulls from your stream or queue and sends to your function. Lambda passes all of the records in the batch to the function in a single call, up to the payload limit for synchronous invocation (6 MB).

• Amazon Kinesis - Default 100. Max 10,000.
• Amazon DynamoDB Streams - Default 100. Max 1,000.
• Amazon Simple Queue Service - Default 10. For standard queues the max is 10,000. For FIFO queues the max is 10.
• Amazon Managed Streaming for Apache Kafka - Default 100. Max 10,000.
• Self-Managed Apache Kafka - Default 100. Max 10,000.

$sel:maximumBatchingWindowInSeconds:UpdateEventSourceMapping', updateEventSourceMapping_maximumBatchingWindowInSeconds - (Streams and Amazon SQS standard queues) The maximum amount of time, in seconds, that Lambda spends gathering records before invoking the function.

Default: 0

Related setting: When you set BatchSize to a value greater than 10, you must set MaximumBatchingWindowInSeconds to at least 1.

$sel:sourceAccessConfigurations:UpdateEventSourceMapping', updateEventSourceMapping_sourceAccessConfigurations - An array of authentication protocols or VPC components required to secure your event source.

$sel:maximumRecordAgeInSeconds:UpdateEventSourceMapping', updateEventSourceMapping_maximumRecordAgeInSeconds - (Streams only) Discard records older than the specified age. The default value is infinite (-1).

$sel:functionResponseTypes:UpdateEventSourceMapping', updateEventSourceMapping_functionResponseTypes - (Streams only) A list of current response type enums applied to the event source mapping.

$sel:tumblingWindowInSeconds:UpdateEventSourceMapping', updateEventSourceMapping_tumblingWindowInSeconds - (Streams only) The duration in seconds of a processing window. The range is between 1 second up to 900 seconds.

$sel:functionName:UpdateEventSourceMapping', updateEventSourceMapping_functionName - The name of the Lambda function.

Name formats

• Function name - MyFunction.
• Function ARN - arn:aws:lambda:us-west-2:123456789012:function:MyFunction.
• Version or Alias ARN - arn:aws:lambda:us-west-2:123456789012:function:MyFunction:PROD.
• Partial ARN - 123456789012:function:MyFunction.

The length constraint applies only to the full ARN. If you specify only the function name, it's limited to 64 characters in length.

$sel:destinationConfig:UpdateEventSourceMapping', updateEventSourceMapping_destinationConfig - (Streams only) An Amazon SQS queue or Amazon SNS topic destination for discarded records.

$sel:uuid:UpdateEventSourceMapping', updateEventSourceMapping_uuid - The identifier of the event source mapping.

When true, the event source mapping is active. When false, Lambda pauses polling and invocation.

Default: True

(Streams only) If the function returns an error, split the batch in two and retry.

(Streams only) The number of batches to process from each shard concurrently.

(Streams only) Discard records after the specified number of retries. The default value is infinite (-1). When set to infinite (-1), failed records will be retried until the record expires.

The maximum number of records in each batch that Lambda pulls from your stream or queue and sends to your function. Lambda passes all of the records in the batch to the function in a single call, up to the payload limit for synchronous invocation (6 MB).

• Amazon Kinesis - Default 100. Max 10,000.
• Amazon DynamoDB Streams - Default 100. Max 1,000.
• Amazon Simple Queue Service - Default 10. For standard queues the max is 10,000. For FIFO queues the max is 10.
• Amazon Managed Streaming for Apache Kafka - Default 100. Max 10,000.
• Self-Managed Apache Kafka - Default 100. Max 10,000.

(Streams and Amazon SQS standard queues) The maximum amount of time, in seconds, that Lambda spends gathering records before invoking the function.

Default: 0

Related setting: When you set BatchSize to a value greater than 10, you must set MaximumBatchingWindowInSeconds to at least 1.

An array of authentication protocols or VPC components required to secure your event source.

(Streams only) Discard records older than the specified age. The default value is infinite (-1).

(Streams only) A list of current response type enums applied to the event source mapping.

(Streams only) The duration in seconds of a processing window. The range is between 1 second up to 900 seconds.

The name of the Lambda function.

Name formats

• Function name - MyFunction.
• Function ARN - arn:aws:lambda:us-west-2:123456789012:function:MyFunction.
• Version or Alias ARN - arn:aws:lambda:us-west-2:123456789012:function:MyFunction:PROD.
• Partial ARN - 123456789012:function:MyFunction.

The length constraint applies only to the full ARN. If you specify only the function name, it's limited to 64 characters in length.

(Streams only) An Amazon SQS queue or Amazon SNS topic destination for discarded records.

The identifier of the event source mapping.

A mapping between an Amazon Web Services resource and a Lambda function. For details, see CreateEventSourceMapping.

See: newEventSourceMappingConfiguration smart constructor.

Create a value of EventSourceMappingConfiguration with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:eventSourceArn:EventSourceMappingConfiguration', eventSourceMappingConfiguration_eventSourceArn - The Amazon Resource Name (ARN) of the event source.

$sel:state:EventSourceMappingConfiguration', eventSourceMappingConfiguration_state - The state of the event source mapping. It can be one of the following: Creating, Enabling, Enabled, Disabling, Disabled, Updating, or Deleting.

$sel:startingPositionTimestamp:EventSourceMappingConfiguration', eventSourceMappingConfiguration_startingPositionTimestamp - With StartingPosition set to AT_TIMESTAMP, the time from which to start reading.

$sel:functionArn:EventSourceMappingConfiguration', eventSourceMappingConfiguration_functionArn - The ARN of the Lambda function.

$sel:topics:EventSourceMappingConfiguration', eventSourceMappingConfiguration_topics - The name of the Kafka topic.

$sel:queues:EventSourceMappingConfiguration', eventSourceMappingConfiguration_queues - (Amazon MQ) The name of the Amazon MQ broker destination queue to consume.

$sel:bisectBatchOnFunctionError:EventSourceMappingConfiguration', eventSourceMappingConfiguration_bisectBatchOnFunctionError - (Streams only) If the function returns an error, split the batch in two and retry. The default value is false.

$sel:uuid:EventSourceMappingConfiguration', eventSourceMappingConfiguration_uuid - The identifier of the event source mapping.

$sel:parallelizationFactor:EventSourceMappingConfiguration', eventSourceMappingConfiguration_parallelizationFactor - (Streams only) The number of batches to process concurrently from each shard. The default value is 1.

$sel:lastProcessingResult:EventSourceMappingConfiguration', eventSourceMappingConfiguration_lastProcessingResult - The result of the last Lambda invocation of your function.

$sel:maximumRetryAttempts:EventSourceMappingConfiguration', eventSourceMappingConfiguration_maximumRetryAttempts - (Streams only) Discard records after the specified number of retries. The default value is -1, which sets the maximum number of retries to infinite. When MaximumRetryAttempts is infinite, Lambda retries failed records until the record expires in the event source.

$sel:batchSize:EventSourceMappingConfiguration', eventSourceMappingConfiguration_batchSize - The maximum number of records in each batch that Lambda pulls from your stream or queue and sends to your function. Lambda passes all of the records in the batch to the function in a single call, up to the payload limit for synchronous invocation (6 MB).

Default value: Varies by service. For Amazon SQS, the default is 10. For all other services, the default is 100.

Related setting: When you set BatchSize to a value greater than 10, you must set MaximumBatchingWindowInSeconds to at least 1.

$sel:stateTransitionReason:EventSourceMappingConfiguration', eventSourceMappingConfiguration_stateTransitionReason - Indicates whether a user or Lambda made the last change to the event source mapping.

$sel:maximumBatchingWindowInSeconds:EventSourceMappingConfiguration', eventSourceMappingConfiguration_maximumBatchingWindowInSeconds - (Streams and Amazon SQS standard queues) The maximum amount of time, in seconds, that Lambda spends gathering records before invoking the function.

Default: 0

Related setting: When you set BatchSize to a value greater than 10, you must set MaximumBatchingWindowInSeconds to at least 1.

$sel:sourceAccessConfigurations:EventSourceMappingConfiguration', eventSourceMappingConfiguration_sourceAccessConfigurations - An array of the authentication protocol, VPC components, or virtual host to secure and define your event source.

$sel:maximumRecordAgeInSeconds:EventSourceMappingConfiguration', eventSourceMappingConfiguration_maximumRecordAgeInSeconds - (Streams only) Discard records older than the specified age. The default value is -1, which sets the maximum age to infinite. When the value is set to infinite, Lambda never discards old records.

$sel:functionResponseTypes:EventSourceMappingConfiguration', eventSourceMappingConfiguration_functionResponseTypes - (Streams only) A list of current response type enums applied to the event source mapping.

$sel:tumblingWindowInSeconds:EventSourceMappingConfiguration', eventSourceMappingConfiguration_tumblingWindowInSeconds - (Streams only) The duration in seconds of a processing window. The range is 1–900 seconds.

$sel:selfManagedEventSource:EventSourceMappingConfiguration', eventSourceMappingConfiguration_selfManagedEventSource - The self-managed Apache Kafka cluster for your event source.

$sel:lastModified:EventSourceMappingConfiguration', eventSourceMappingConfiguration_lastModified - The date that the event source mapping was last updated or that its state changed.

$sel:destinationConfig:EventSourceMappingConfiguration', eventSourceMappingConfiguration_destinationConfig - (Streams only) An Amazon SQS queue or Amazon SNS topic destination for discarded records.

$sel:startingPosition:EventSourceMappingConfiguration', eventSourceMappingConfiguration_startingPosition - The position in a stream from which to start reading. Required for Amazon Kinesis, Amazon DynamoDB, and Amazon MSK stream sources. AT_TIMESTAMP is supported only for Amazon Kinesis streams.

The Amazon Resource Name (ARN) of the event source.

The state of the event source mapping. It can be one of the following: Creating, Enabling, Enabled, Disabling, Disabled, Updating, or Deleting.

With StartingPosition set to AT_TIMESTAMP, the time from which to start reading.

The ARN of the Lambda function.

The name of the Kafka topic.

(Amazon MQ) The name of the Amazon MQ broker destination queue to consume.

(Streams only) If the function returns an error, split the batch in two and retry. The default value is false.

The identifier of the event source mapping.

(Streams only) The number of batches to process concurrently from each shard. The default value is 1.

The result of the last Lambda invocation of your function.

(Streams only) Discard records after the specified number of retries. The default value is -1, which sets the maximum number of retries to infinite. When MaximumRetryAttempts is infinite, Lambda retries failed records until the record expires in the event source.

The maximum number of records in each batch that Lambda pulls from your stream or queue and sends to your function. Lambda passes all of the records in the batch to the function in a single call, up to the payload limit for synchronous invocation (6 MB).

Default value: Varies by service. For Amazon SQS, the default is 10. For all other services, the default is 100.

Related setting: When you set BatchSize to a value greater than 10, you must set MaximumBatchingWindowInSeconds to at least 1.

Indicates whether a user or Lambda made the last change to the event source mapping.

(Streams and Amazon SQS standard queues) The maximum amount of time, in seconds, that Lambda spends gathering records before invoking the function.

Default: 0

Related setting: When you set BatchSize to a value greater than 10, you must set MaximumBatchingWindowInSeconds to at least 1.

An array of the authentication protocol, VPC components, or virtual host to secure and define your event source.

(Streams only) Discard records older than the specified age. The default value is -1, which sets the maximum age to infinite. When the value is set to infinite, Lambda never discards old records.

(Streams only) A list of current response type enums applied to the event source mapping.

(Streams only) The duration in seconds of a processing window. The range is 1–900 seconds.

The self-managed Apache Kafka cluster for your event source.

The date that the event source mapping was last updated or that its state changed.

(Streams only) An Amazon SQS queue or Amazon SNS topic destination for discarded records.

The position in a stream from which to start reading. Required for Amazon Kinesis, Amazon DynamoDB, and Amazon MSK stream sources. AT_TIMESTAMP is supported only for Amazon Kinesis streams.