Initiates the authentication request.

See: newInitiateAuth smart constructor.

Create a value of InitiateAuth with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:clientMetadata:InitiateAuth', initiateAuth_clientMetadata - A map of custom key-value pairs that you can provide as input for certain custom workflows that this action triggers.

You create custom workflows by assigning Lambda functions to user pool triggers. When you use the InitiateAuth API action, Amazon Cognito invokes the Lambda functions that are specified for various triggers. The ClientMetadata value is passed as input to the functions for only the following triggers:

• Pre signup
• Pre authentication
• User migration

When Amazon Cognito invokes the functions for these triggers, it passes a JSON payload, which the function receives as input. This payload contains a validationData attribute, which provides the data that you assigned to the ClientMetadata parameter in your InitiateAuth request. In your function code in Lambda, you can process the validationData value to enhance your workflow for your specific needs.

When you use the InitiateAuth API action, Amazon Cognito also invokes the functions for the following triggers, but it does not provide the ClientMetadata value as input:

• Post authentication
• Custom message
• Pre token generation
• Create auth challenge
• Define auth challenge
• Verify auth challenge

For more information, see Customizing User Pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.

Take the following limitations into consideration when you use the ClientMetadata parameter:

• Amazon Cognito does not store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool to support custom workflows. If your user pool configuration does not include triggers, the ClientMetadata parameter serves no purpose.
• Amazon Cognito does not validate the ClientMetadata value.
• Amazon Cognito does not encrypt the the ClientMetadata value, so don't use it to provide sensitive information.

$sel:analyticsMetadata:InitiateAuth', initiateAuth_analyticsMetadata - The Amazon Pinpoint analytics metadata for collecting metrics for InitiateAuth calls.

$sel:userContextData:InitiateAuth', initiateAuth_userContextData - Contextual data such as the user's device fingerprint, IP address, or location used for evaluating the risk of an unexpected event by Amazon Cognito advanced security.

$sel:authParameters:InitiateAuth', initiateAuth_authParameters - The authentication parameters. These are inputs corresponding to the AuthFlow that you are invoking. The required values depend on the value of AuthFlow:

• For USER_SRP_AUTH: USERNAME (required), SRP_A (required), SECRET_HASH (required if the app client is configured with a client secret), DEVICE_KEY.
• For REFRESH_TOKEN_AUTH/REFRESH_TOKEN: REFRESH_TOKEN (required), SECRET_HASH (required if the app client is configured with a client secret), DEVICE_KEY.
• For CUSTOM_AUTH: USERNAME (required), SECRET_HASH (if app client is configured with client secret), DEVICE_KEY. To start the authentication flow with password verification, include ChallengeName: SRP_A and SRP_A: (The SRP_A Value).

$sel:authFlow:InitiateAuth', initiateAuth_authFlow - The authentication flow for this call to execute. The API action will depend on this value. For example:

• REFRESH_TOKEN_AUTH will take in a valid refresh token and return new tokens.
• USER_SRP_AUTH will take in USERNAME and SRP_A and return the SRP variables to be used for next challenge execution.
• USER_PASSWORD_AUTH will take in USERNAME and PASSWORD and return the next challenge or tokens.

Valid values include:

• USER_SRP_AUTH: Authentication flow for the Secure Remote Password (SRP) protocol.
• REFRESH_TOKEN_AUTH/REFRESH_TOKEN: Authentication flow for refreshing the access token and ID token by supplying a valid refresh token.
• CUSTOM_AUTH: Custom authentication flow.
• USER_PASSWORD_AUTH: Non-SRP authentication flow; USERNAME and PASSWORD are passed directly. If a user migration Lambda trigger is set, this flow will invoke the user migration Lambda if the USERNAME is not found in the user pool.
• ADMIN_USER_PASSWORD_AUTH: Admin-based user password authentication. This replaces the ADMIN_NO_SRP_AUTH authentication flow. In this flow, Cognito receives the password in the request instead of using the SRP process to verify passwords.

ADMIN_NO_SRP_AUTH is not a valid value.

$sel:clientId:InitiateAuth', initiateAuth_clientId - The app client ID.

A map of custom key-value pairs that you can provide as input for certain custom workflows that this action triggers.

You create custom workflows by assigning Lambda functions to user pool triggers. When you use the InitiateAuth API action, Amazon Cognito invokes the Lambda functions that are specified for various triggers. The ClientMetadata value is passed as input to the functions for only the following triggers:

• Pre signup
• Pre authentication
• User migration

When Amazon Cognito invokes the functions for these triggers, it passes a JSON payload, which the function receives as input. This payload contains a validationData attribute, which provides the data that you assigned to the ClientMetadata parameter in your InitiateAuth request. In your function code in Lambda, you can process the validationData value to enhance your workflow for your specific needs.

When you use the InitiateAuth API action, Amazon Cognito also invokes the functions for the following triggers, but it does not provide the ClientMetadata value as input:

• Post authentication
• Custom message
• Pre token generation
• Create auth challenge
• Define auth challenge
• Verify auth challenge

For more information, see Customizing User Pool Workflows with Lambda Triggers in the Amazon Cognito Developer Guide.

Take the following limitations into consideration when you use the ClientMetadata parameter:

• Amazon Cognito does not store the ClientMetadata value. This data is available only to Lambda triggers that are assigned to a user pool to support custom workflows. If your user pool configuration does not include triggers, the ClientMetadata parameter serves no purpose.
• Amazon Cognito does not validate the ClientMetadata value.
• Amazon Cognito does not encrypt the the ClientMetadata value, so don't use it to provide sensitive information.

The Amazon Pinpoint analytics metadata for collecting metrics for InitiateAuth calls.

Contextual data such as the user's device fingerprint, IP address, or location used for evaluating the risk of an unexpected event by Amazon Cognito advanced security.

The authentication parameters. These are inputs corresponding to the AuthFlow that you are invoking. The required values depend on the value of AuthFlow:

• For USER_SRP_AUTH: USERNAME (required), SRP_A (required), SECRET_HASH (required if the app client is configured with a client secret), DEVICE_KEY.
• For REFRESH_TOKEN_AUTH/REFRESH_TOKEN: REFRESH_TOKEN (required), SECRET_HASH (required if the app client is configured with a client secret), DEVICE_KEY.
• For CUSTOM_AUTH: USERNAME (required), SECRET_HASH (if app client is configured with client secret), DEVICE_KEY. To start the authentication flow with password verification, include ChallengeName: SRP_A and SRP_A: (The SRP_A Value).

The authentication flow for this call to execute. The API action will depend on this value. For example:

• REFRESH_TOKEN_AUTH will take in a valid refresh token and return new tokens.
• USER_SRP_AUTH will take in USERNAME and SRP_A and return the SRP variables to be used for next challenge execution.
• USER_PASSWORD_AUTH will take in USERNAME and PASSWORD and return the next challenge or tokens.

Valid values include:

• USER_SRP_AUTH: Authentication flow for the Secure Remote Password (SRP) protocol.
• REFRESH_TOKEN_AUTH/REFRESH_TOKEN: Authentication flow for refreshing the access token and ID token by supplying a valid refresh token.
• CUSTOM_AUTH: Custom authentication flow.
• USER_PASSWORD_AUTH: Non-SRP authentication flow; USERNAME and PASSWORD are passed directly. If a user migration Lambda trigger is set, this flow will invoke the user migration Lambda if the USERNAME is not found in the user pool.
• ADMIN_USER_PASSWORD_AUTH: Admin-based user password authentication. This replaces the ADMIN_NO_SRP_AUTH authentication flow. In this flow, Cognito receives the password in the request instead of using the SRP process to verify passwords.

ADMIN_NO_SRP_AUTH is not a valid value.

The app client ID.

Initiates the authentication response.

See: newInitiateAuthResponse smart constructor.

Create a value of InitiateAuthResponse with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:challengeName:InitiateAuthResponse', initiateAuthResponse_challengeName - The name of the challenge which you are responding to with this call. This is returned to you in the AdminInitiateAuth response if you need to pass another challenge.

Valid values include the following. Note that all of these challenges require USERNAME and SECRET_HASH (if applicable) in the parameters.

• SMS_MFA: Next challenge is to supply an SMS_MFA_CODE, delivered via SMS.
• PASSWORD_VERIFIER: Next challenge is to supply PASSWORD_CLAIM_SIGNATURE, PASSWORD_CLAIM_SECRET_BLOCK, and TIMESTAMP after the client-side SRP calculations.
• CUSTOM_CHALLENGE: This is returned if your custom authentication flow determines that the user should pass another challenge before tokens are issued.
• DEVICE_SRP_AUTH: If device tracking was enabled on your user pool and the previous challenges were passed, this challenge is returned so that Amazon Cognito can start tracking this device.
• DEVICE_PASSWORD_VERIFIER: Similar to PASSWORD_VERIFIER, but for devices only.
• NEW_PASSWORD_REQUIRED: For users who are required to change their passwords after successful first login. This challenge should be passed with NEW_PASSWORD and any other required attributes.

• MFA_SETUP: For users who are required to setup an MFA factor before they can sign-in. The MFA types enabled for the user pool will be listed in the challenge parameters MFA_CAN_SETUP value.

  To setup software token MFA, use the session returned here from InitiateAuth as an input to AssociateSoftwareToken, and use the session returned by VerifySoftwareToken as an input to RespondToAuthChallenge with challenge name MFA_SETUP to complete sign-in. To setup SMS MFA, users will need help from an administrator to add a phone number to their account and then call InitiateAuth again to restart sign-in.

$sel:challengeParameters:InitiateAuthResponse', initiateAuthResponse_challengeParameters - The challenge parameters. These are returned to you in the InitiateAuth response if you need to pass another challenge. The responses in this parameter should be used to compute inputs to the next call (RespondToAuthChallenge).

All challenges require USERNAME and SECRET_HASH (if applicable).

$sel:authenticationResult:InitiateAuthResponse', initiateAuthResponse_authenticationResult - The result of the authentication response. This is only returned if the caller does not need to pass another challenge. If the caller does need to pass another challenge before it gets tokens, ChallengeName, ChallengeParameters, and Session are returned.

$sel:session:InitiateAuthResponse', initiateAuthResponse_session - The session which should be passed both ways in challenge-response calls to the service. If the caller needs to go through another challenge, they return a session with other challenge parameters. This session should be passed as it is to the next RespondToAuthChallenge API call.

$sel:httpStatus:InitiateAuthResponse', initiateAuthResponse_httpStatus - The response's http status code.

The name of the challenge which you are responding to with this call. This is returned to you in the AdminInitiateAuth response if you need to pass another challenge.

Valid values include the following. Note that all of these challenges require USERNAME and SECRET_HASH (if applicable) in the parameters.

• SMS_MFA: Next challenge is to supply an SMS_MFA_CODE, delivered via SMS.
• PASSWORD_VERIFIER: Next challenge is to supply PASSWORD_CLAIM_SIGNATURE, PASSWORD_CLAIM_SECRET_BLOCK, and TIMESTAMP after the client-side SRP calculations.
• CUSTOM_CHALLENGE: This is returned if your custom authentication flow determines that the user should pass another challenge before tokens are issued.
• DEVICE_SRP_AUTH: If device tracking was enabled on your user pool and the previous challenges were passed, this challenge is returned so that Amazon Cognito can start tracking this device.
• DEVICE_PASSWORD_VERIFIER: Similar to PASSWORD_VERIFIER, but for devices only.
• NEW_PASSWORD_REQUIRED: For users who are required to change their passwords after successful first login. This challenge should be passed with NEW_PASSWORD and any other required attributes.

• MFA_SETUP: For users who are required to setup an MFA factor before they can sign-in. The MFA types enabled for the user pool will be listed in the challenge parameters MFA_CAN_SETUP value.

  To setup software token MFA, use the session returned here from InitiateAuth as an input to AssociateSoftwareToken, and use the session returned by VerifySoftwareToken as an input to RespondToAuthChallenge with challenge name MFA_SETUP to complete sign-in. To setup SMS MFA, users will need help from an administrator to add a phone number to their account and then call InitiateAuth again to restart sign-in.

The challenge parameters. These are returned to you in the InitiateAuth response if you need to pass another challenge. The responses in this parameter should be used to compute inputs to the next call (RespondToAuthChallenge).

All challenges require USERNAME and SECRET_HASH (if applicable).

The result of the authentication response. This is only returned if the caller does not need to pass another challenge. If the caller does need to pass another challenge before it gets tokens, ChallengeName, ChallengeParameters, and Session are returned.

The session which should be passed both ways in challenge-response calls to the service. If the caller needs to go through another challenge, they return a session with other challenge parameters. This session should be passed as it is to the next RespondToAuthChallenge API call.

The response's http status code.